Code by Scott שאול בן ישוע
Verified Commit 748ffc2e authored by Sha'ul ben Yeshua's avatar Sha'ul ben Yeshua 🎗
Browse files

Edited README for install directions

parent 7b65ff75
...@@ -4,4 +4,25 @@ Nut discovery + UPS & outlet status ...@@ -4,4 +4,25 @@ Nut discovery + UPS & outlet status
# Install # Install
Add all 3 to the system, configure a new virtual device of the "Nut UPS Driver" type and it will auto-populate child objects. 1. Add all 3 to the Drivers
1. Configure a new virtual device using "Nut UPS Driver" as the driver type
1. It will auto-populate child objects and support the outlet(s) if compaitable.
# Cavets
For anyone that has a Cyber Power System CP1500 AVR or simular and you have debian you need to manually create /etc/udev/rules.d/52-nut-usbups.rules with
# set permissions for CyberPower UPS -jea 2010-06-02
SUBSYSTEM=="usb", ATTRS{idVendor}=="0764", GROUP="nut", MODE="0660"
Then plug the usb cable back in.
In your ups.conf file you need
[myups]
driver = usbhid-ups
port = /dev/usb/hiddev0
desc = "My UPS"
pollinterval = 15
Make sure you have MODE=netserver in nut.conf
Supports Markdown
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment